Guangdong Blue Whale Ultrasonic Equipment Co;Ltd
-Your Cleaning Expert - ultrasonic cleaning equipment/peripheral - 17 kinds of cleaning solution for different industry - Patent Technology for effuent treatment - Surface treatment solution provider
Add to Cart
3.2Liter With 200W Heating Power Ultrasonic Gun Washer For Bullet Case Reloading
Why You Need Whale Cleen sonic Ultrasonic Cleaner?
In case you are a lover of guns, then you might now be well aware of the importance of keeping the cartridge clean too.
The most common method employed to keep these cartridges clean is to use a brass case. Brass is the best choice of storage for your cartridges as it offers you with the following advantages:
This is when you need to checkout alternate techniques to cleaning brass cases.
The most recent and efficient method of cleaning brass shells is ultrasonic cleaning.This is also termed as wet method and once installed it can even be used for cleaning your gun parts too.
This is the best method of cleaning when it comes to users of pistols and high volume loaders. You will need to take the primer first and separate them before going ahead with cleaning on the whole. This is also the best method as you can go ahead with cleaning and drying simultaneously.
Just as the name suggests, ultrasonic cleaner such as Hornady lock n load cleaner makes use of water for the process of cleaning brass.
These ultrasonic equipment contains a built in basket that can be used to deposit cartridges. The basket is then put in to the container which is already filled with water and cleaning solvent.
This cleaning solvent will then do the job of taking away carbon and other waste deposits from brass.
Yet another added advantage of ultrasonic method of cleaning is that it takes less than fifteen minutes so as to do its job in an automated way. This means you need not invest more of your valuable time or efforts into cleaning your guns and brass cases.
Once the cleaning is complete, you need to take out the cartridges. With wet cleaning, the brass needs to be dried soon after it’s taken out from the container.
The most natural method of drying is to place the element to a towel and then keep it under sun and this way the drying process is complete.
The most added advantage of wet cleaning is that it cleans shells inside out and allows better cleaning experience than any other traditional methods.
With ultrasonic cleaning you need not worry about items getting jammed inside the lid and also it offers a cost effective solution to your need.
The only factor that needs to your attention is drying which is not a tough task as the most natural energy shall do the job for you.
Specification:
| Model | Z-S02 |
| Ultrasonic Frequency | 40,000 Hz |
| Tank Material | Stainless Steel SUS304 |
| Tank Capacity | 3.2 L |
| Timer | 1-30minutes ,Digital timer |
| Power Supply | AC 100 ~ 120V, 50 / 60Hz AC 220 ~ 240V, 50 / 60 Hz |
| Ultrasonic Power | 120W |
| Heating Power | 200 W , Digital Heating |
| Tank Size | 240x135x100 mm ( L x W x H ) |
| Unit Size | 265x165x220 mm ( L x W x H ) |
| Package Size | 340x245x310 mm( L x W x H ) |
If this model is not suitable for you, please check other in below chart.
| Model | Tank size | Unit size | Volume | Actual ultrasonic power | Rated ultrasonic power | Ultrasonic frequency | Heating power | Timer | Heating temperature |
| LxWxH(mm) | LxWxH(mm) | (L) | (W) | (W) | (kHz) | (W) | (MIN) | (℃) | |
| Z-S008 | 150x85x65 | 175x110x125 | 0.8 | 30 | 30 | 40 | no | 1-30 | no |
| Z-S01 | 150x135×100 | 175x160x210 | 2 | 50 | 60 | 40 | 150 | 1-30 | 0-80 |
| Z-S02 | 240x135x100 | 265x165x220 | 3.2 | 100 | 120 | 150 | |||
| Z-S03 | 300x150x100 | 325x180x225 | 4.5 | 150 | 180 | 300 | |||
| Z-S031 | 300x150x150 | 325x180x280 | 6.5 | 150 | 180 | 300 | |||
| Z-S04 | 300x240x150 | 325x265x280 | 10.8 | 200 | 240 | 450 | |||
| Z-S06 | 330x300x150 | 360x325x285 | 15 | 300 | 360 | 450 | |||
| Z-S08 | 500x300x150 | 530x325×285 | 22 | 400 | 480 | 600 | |||
| Z-S10 | 500x300x200 | 530x325x325 | 30 | 500 | 600 | 600 |
Customer Feedback Of Reloading Case: