Engine Ultrasonic Cleaner For Car Parts

61 Liter 900 Watt Ultrasonic Cleaner Car Parts For Engine Rebuilding

Why You Need Ultrasonic Cleaner For Engine Rebuilding?

Cylinder heads have difficult to reach internal channels. For peak performance these channels where the air enter the engine need to be as clean and smooth as possible thus maximising the air flow to the combustion chamber. The oil cooling channels which run through the head and allow the oil to flow also need to be clean and free from potential blockages in order for the engine to gain sufficient cooling. These channels are subjected to high temperature contamination build up from both the combustion chamber and the engine oil. Typically deposits in these areas are carbon and coagulated oil. In the worst case scenario of an engine blow up, or a valve stem oil failure oil can also be forced backwards through the inlet manifold and become baked on in this notorious hard place to clean. In this situation the ability to clean without dismantling the head completely has obvious benefits. By placing the cylinder head, complete with valves and cams into an ultrasonic tank the cleaning action instantly reaches these channels and subjects the surface to a rigorous cleaning process, lifting off the deposits. Unlike alternative methods of cleaning it can take as little as ten minutes to removal these baked on residues with the cylinder head emerging in almost new condition. The minute gaps around the valves and through the valve guides are small enough for water particles to penetrate and if this occurs then cavitation will be occurring within these spaces, and ultimately the cleaning action.
Another component which is extremely difficult to clean effectively is that of fuel injectors. All modern engines use fuel injection systems as they are far more efficient than old style carbs. However, these small items have internal needles which become clogged over time. Cleaning agents which can be added to the fuel do clean them but not as efficiently as an ultrasonic process will. By placing injectors into an ultrasonic tank the internal channel of this needle will be subjected to cavitation and therefore ultrasonic cleaning. The process is gentle enough not to damage the internal elements of the injector as it breaks down any build up of fuel or dirt which passed through the fuel filter and made it into the injection system. The results of cleaning injectors in an ultrasonic cleaning system will be instantly visible with the fuel jet producing a cone shaped spray which leads to maximum fuel flow and efficiency.

Specification:

If this model is not suitable for your cleaning requirement, please contact our sales team for other recommendation.


Cleaning Effect:




How It Works?

Ultrasonic cleaner for auto parts consists of a wide stainless steel tank which can hold safe and biodegradable ultrasonic cleaning solution for advanced cleaning results.
When the device is turned On, the powerful transducer in the machine develop millions of microscopic bubbles in the cleaning solution. These bubbles implode with tremendous force by contacting the car engine parts. And in the process all type of grease, dirt, grime, and carbon deposit is stripped off completely without any damages.
After completing the cleaning process, you need to rinse and dry off the auto parts to make it ready for re-assembling. Overall, making use of ultrasonic cleaners makes your job easy and fast. You should get one now if you do not use it yet for cleaning car engine parts.
Although there are many smaller versions of ultrasonic cleaner for car engine parts available in the market, an ultrasonic cleaner with bigger tank is mostly preferred for professional cleaning and repairing. This will help you to use the cleaner for cleaning various bigger engine parts with much ease